Tooth Point 61L1-3029, 61L13029 Bucket Tips 

How To Control The Cutting Edge Quality?

YASSIAN Factory Quality Control process-Raw Material

1. Use this experimental furnace to conduct heat treatment, then test the hardness of the samples and record the test results along with the date.

2. After inspection, if any of the materials do not meet our standards, they will be returned to the raw material factory.

Quality Control—YASSIAN Raw material certificate from other supplier

Inspectors will check all the data in the certificate to make sure Make sure all data meets standards.

After heat-treatment, our inspectors will cut the small test blocks from the blades samples and bucket teeth, then make test of hardness, tensile, impact resistance to make sure all the result is qualified.

In pectors will make a final inspection of dimensions, holes distance , hardness to make sure all parts meet our quality stand.

YASSIAN CUTTING BLADES TEST REPORT

1. We have in process inspectors to check all dimension and the hardness during production.

2. We also have a final inspector to check everything (dimensions, holes distances, hardness) before packing and then make the reports.

YASSIAN CUTTING EDGES WARRANTY

1. 24 MONTHS QUALITY GUARANTEE.

2. MANUFACTURE G.E.T PARTS FOR MORE THAN 20 YEARS.

The main employees of the factory are the old ones with an average of more than 10 years of service in our factory with rich experience.

3. VIP CUSTOMER CAN GET MORE SUPPORT FROM US.

Shorter delivery time,regional agency,additional discount, better payment ways,parts design etc.